Home Blog Prepare an above ground pool after a long sitting

Prepare an above ground pool after a long sitting

Swimming in a pool that has been sitting for some time is a really bizarre idea, mainly because of hygienic reasons. However, getting access to a pool where you can spend your holidays is really cool, so you just need to learn how to clean up a pool that has been sitting. Knowing how confusing this process can be, I’ve decided to write this article, covering the smallest nuances of returning your pool to life. From filtrations and leaks to adding chemicals and maintaining the pool – you can find all needed info in this post.

Things to Check While Restoring a Sitting Pool

If you have to deal with a sitting pool, chances are high it is in a very poor condition. This means you need to restore it, starting with basic preparation steps. First off, you need to check the parts of a pool and the equipment.

Filtration

Primarily, check the filtration systems. It is likely to be filled with leaves, plants, debris, etc. You need to remove all items, so that water can easily pass through the systems.
When you use a pool, you need to check a filtration system on a regular basis to prevent clogging. If you neglect this tip, some elements may get damaged, so you’ll have to replace them.

Water

Old pools usually have very dirty water, and if this is your case, make sure to clean it up. Start with removing the algae. The easiest way to do it is to add chlorine to the water. Then you can use pool tests to ensure the pH and chlorine levels are on point.

Leaks

Inspect the body of the pool for any deformations and leaks. If they are minor, you can easily fix them. In case the damages are severe, you need to reline the pool.

Remove dirt in above ground pool

How to Clean a Sitting Pool

STEP 1

If there are any cracks, you need to repair them on your own or ask a professional for help.

STEP 2

Drain a pool if it is full of different debris. Use a trash pump for sucking out leaves, twigs, etc.

STEP 3

Fill the pool with clean water.

STEP 4

Once the pool is clean, you need to balance alkalinity, hardness, pH, and other chemicals. When the water acquires a bluish tint, you need to stop. Besides, you can use a clarifier to remove extras.

STEP 5

Get down to maintenance work. This refers to regular draining and cleaning out your pool, as well as checking chemicals.

Suggested articles
great to know | 23 Apr 2021 How to burnish Venetian plaster How to burnish Venetian plaster

If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you.

Subscribe